Additional Information - Compaq Smart Array 221 User Manual

Additional Information

Included on the Windows NT SSDs is an NTREADME.HLP WinHelp file that
contains the latest information about Windows NT, including the driver
installation procedure. You are encouraged to read this information and use it if
it differs from the information shown here
To read the NTREADME.HLP WinHelp file you need a server running
Windows NT or a PC running Windows:
1. Place the Windows NT SSDs, one at a time, in the floppy drive.
2. Open a Command Prompt, make A: the current drive and type:
readme.bat
or
Select File → Run from Windows Program Manager, then enter:
a:\readme.bat
3. Select the help topic(s) to read or print. Some topics that should be of
particular interest are:
Compaq SSD for Windows NT Installation Methods
Using the Compaq SSD for Windows NT Program
Windows NT Device Driver Specifics
Compaq SCSI Controller Support
Compaq Drive Array Support
Installing the Compaq Drive Array Driver During
Windows NT Installation
Installing the Compaq Drive Array Driver After
Windows NT Installation
Updating the Compaq Drive Array Driver
Removing the Compaq Drive Array Driver
Writer: Karen Hale Project: Compaq Smart Array 221 Controller User Guide Comments: 388541-001
File Name: H-CH07.DOC Last Saved On: 11/3/98 9:51 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Compaq Smart Array 221 Controller User Guide
7-7