Compaq Smart Array 221 User Manual page 96

Example: A system that has three adapters that are controlled by the
CPQARRAY.ADD, with the lowest configured adapter being the
secondary controller.
Controller Order
2
3
5
[unit parameters] This ADD only supports the /I parameter, to ignore a
controller. The following unit parameter is available:
/I Ignore the specified adapter; do not control the adapter with this
driver. This parameter prevents the ADD driver from recognizing the
specified adapter. Use this parameter when you intend to allow another
driver to control a specific adapter.
CAUTION: Be careful not to ignore the primary controller, or
boot controller, because this would cause the system to be unable
to boot
Example: You are running NetWare on your OS/2 2.x system and you
want a NetWare NLM to control adapter 2 instead of the ADD driver.
The following statement would prevent the ADD driver from claiming
adapter 2.
BASEDEV=CPQARRAY.ADD /A:2 /I
Writer: Karen Hale Project: Compaq Smart Array 221 Controller User Guide Comments: 388541-001
File Name: H-CH07.DOC Last Saved On: 11/3/98 9:51 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Adapter Index
0
1
2
.
Compaq Smart Array 221 Controller User Guide
7-27