68
Chapter 5: Maintenance and Troubleshooting
VSpin User Guide
Preparing to Clean the VSpin
Overview
Perform the following procedures before cleaning the VSpin:
Step
Procedure
1.
Disconnect the power supply.
2.
Disconnect the air supply.
3.
Disconnect the serial cable
4.
Unlock and open the door
5.
Remove the buckets
!! DAMAGE HAZARD !!
before performing any cleaning or maintenance.
Comments
Pull out the power cord.
See "Disconnecting the Air Supply"
on page 67.
Pull out the serial cable.
See "Unlocking and Opening the
Door Manually" on page 69.
See "Removing the Buckets" on
page 71
Disconnect power, air and serial cable