Disconnecting The Air Supply - Agilent Technologies Velocity11 VSpin User Manual

Disconnecting the Air Supply

When to Use Disconnect the air supply before:
❑ Performing maintenance on the VSpin
❑ Cleaning the VSpin
❑
Cleaning up broken plates
To disconnect the air supply:
1. Turn off the air supply so that there is no air pressure to the VSpin.
2. Push in the orange locking collar.
00080
VSpin
attach air hose
3. Gently pull on the air hose with your free hand until the air hose
comes out.
Chapter 5: Maintenance and Troubleshooting
Orange locking collar
VSpin User Guide
00080
67