66
Chapter 5: Maintenance and Troubleshooting
VSpin User Guide
Routine Maintenance
VSpin Maintenance
Safety Warning
When to Contact
Velocity11
To keep your VSpin working properly, we recommend that you schedule
with the Velocity11 Service Center at least one maintenance visit every
two years.
In general, practice good housekeeping by cleaning up spills and
following the procedures described in this chapter.
!! DAMAGE HAZARD !!
rotor mounting screw, which fastens the rotor to the central
motor axle. It is located on the bottom of the rotor. Consult
Velocity11
®
if you think the rotor mounting screw requires
maintenance. The VSpin is designed to have a permanently
attached rotor, unlike many manual centrifuges that can have
interchangeable rotors.
Contact Velocity11 if you are unable to resolve problems after reading
the "VSpin Error Reference" on page 79.
Do not tamper with or adjust the VSpin