Removing The Buckets - Agilent Technologies Velocity11 VSpin User Manual

Removing the Buckets

Overview
Removing a Bucket
You need to remove the buckets before cleaning or moving the VSpin.
To access the buckets, you must open the door manually
To remove a bucket:
1. Make sure the power and air are turned off.
2. Open the door manually.
See "Unlocking and Opening the Door Manually" on page 69.
3. Pivot the bucket in towards the center of the VSpin and pull the
bucket towards you until it comes free of the pins.
00108
VSpin
Rotor assembly - bucket rotated
4. Rotate one end of the bucket towards you, and turn it upside down.
00114
5. Remove the bucket from the door.
Chapter 5: Maintenance and Troubleshooting
00114
VSpin
bucket removed
VSpin User Guide
Pin
Bucket
71