Turning On The Vspin - Agilent Technologies Velocity11 VSpin User Manual

Turning on the VSpin

Procedure
Where to Go Next
To turn on the VSpin:
1. Verify that the air and power are connected to the VSpin and to their
sources.
2. Verify that the serial communications cable is connected to the
VSpin and to the computer.
3. Turn the power switch on.
To verify that the VSpin has power, you must start the VSpin
Diagnostics software. See "Starting the Software" on page 48.
There are no outwardly observable signs that the VSpin has power.
Before you start a spin, refer to the "Workflow Overview" on page 46 to
prepare your VSpin.
Chapter 4: Performing a Spin
VSpin User Guide
47