Software Overview - Agilent Technologies Velocity11 VSpin User Manual

Software Overview

Lab Automation
Software
Centrifuge
Diagnostics
Software
Test Container
Software
Profile of centrifuge limits for labware height and depth
The Centrifuge is designed to be used with a lab automation system
such as the BioCel, that controls normal runs through its own software.
For example, if you are using a BioCel, the VWorks software controls the
Centrifuge. See the documents that came with your lab automation
system for more information.
To set up the Centrifuge for automated operation and to troubleshoot
problems, use the diagnostics software, which is described in this guide.
The diagnostics software sends simple real-time commands, which are
issued immediately to the Centrifuge.
You must load a profile from the diagnostics software to initialize and
run the Centrifuge. See the Centrifuge Version 8 Quick Reference and the
Microplate Centrifuge Quick Guide.
The VSpin test container is an application that lets you access the
diagnostics software without VWorks or a link from third-party lab
automation software. It is used mainly by integrators, and is located on
the included software CD.
Depth
7.8 cm
8.6 cm
Chapter 2: VSpin Overview
VSpin User Guide
4.8 cm
4.0 cm
Height
9