Packing The Vspin For Shipping - Agilent Technologies Velocity11 VSpin User Manual

Packing the VSpin for Shipping

Overview
Returning Your
VSpin to Velocity11
List of Packing
Materials
VSpin Packing
Procedure
If you need to ship your VSpin, it is important that you follow the
procedures outlined in this topic to prevent damage.
!! DAMAGE HAZARD !!
original packaging material. Contact the Velocity11 Service
Center if you need replacement packaging.
Packing the VSpin is best done with two people.
If you plan to return your VSpin to Velocity11, call the Velocity11 Service
Center for directions and to obtain a copy of the Velocity11
decontamination form.
!! IMPORTANT !! If you are shipping your VSpin back to
Velocity11, you must decontaminate the VSpin and send us a
completed copy of the Velocity11 decontamination form.
You need the following packing materials, which shipped with your
VSpin:
❑
VSpin shipping box
❑
Foam insert for the VSpin door
❑ Anti-static bag for the VSpin
❑ Top piece of foam
❑
Bottom piece of foam
❑
Piece of spacer foam
❑ Bucket box
❑ Three pieces of foam wrap for the buckets
❑
Accessories box
To pack the VSpin:
1. Open the VSpin door manually.
See "Unlocking and Opening the Door Manually" on page 69.
2. Remove the buckets.
See "Removing the Buckets" on page 71.
3. Place the foam insert into the door to keep it from moving.
Chapter 5: Maintenance and Troubleshooting
Do not ship your VSpin without the
VSpin User Guide
83