Table of Contents
Advertisement
Notices
© Agilent Technologies, Inc. 2014
No part of this manual may be reproduced
in any form or by any means (including
electronic storage and retrieval or
translation into a foreign language) without
prior agreement and written consent from
Agilent Technologies, Inc. as governed by
United States and international copyright
laws.
User Guide Part Number
G5405-90001
Edition
Revision C, June 2014
Updates: Performance Specifications and
Labware Compatibility
Revision 02, March 2012
Updates: title page, Safety Notices,
compliance declarations, and general
safety warnings.
Revision 00, August 2004
Contact Information
Agilent Technologies Inc.
Automation Solutions
5301 Stevens Creek Blvd.
Santa Clara, CA 95051
USA
Technical Support: 1.800.979.4811
or +1.408.345.8011
service.automation@agilent.com
Customer Service: 1.866.428.9811
or +1.408.345.8356
orders.automation@agilent.com
European Service: +44 (0)1763850230
euroservice.automation@agilent.com
Documentation feedback:
documentation.automation@agilent.com
Web:
www.agilent.com/lifesciences/
automation
Acknowledgements
Microsoft® and Windows® are either
registered trademarks or trademarks of the
Microsoft Corporation in the United States
and other countries.
Warranty
The material contained in this docu-
ment is provided "as is," and is sub-
ject to being changed, without notice,
in future editions. Further, to the max-
imum extent permitted by applicable
law, Agilent disclaims all warranties,
either express or implied, with regard
to this manual and any information
contained herein, including but not
limited to the implied warranties of
merchantability and fitness for a par-
ticular purpose. Agilent shall not be
liable for errors or for incidental or
consequential damages in connection
with the furnishing, use, or perfor-
mance of this document or of any
information contained herein. Should
Agilent and the user have a separate
written agreement with warranty
terms covering the material in this
document that conflict with these
terms, the warranty terms in the sep-
arate agreement shall control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a
license and may be used or copied only in
accordance with the terms of such license.
Restricted Rights Legend
If software is for use in the performance of
a U.S. Government prime contract or sub-
contract, Software is delivered and
licensed as "Commercial computer soft-
ware" as defined in DFAR 252.227-7014
(June 1995), or as a "commercial item" as
defined in FAR 2.101(a) or as "Restricted
computer software" as defined in FAR
52.227-19 (June 1987) or any equivalent
agency regulation or contract clause. Use,
duplication or disclosure of Software is
subject to Agilent Technologies' standard
commercial license terms, and non-DOD
Departments and Agencies of the U.S. Gov-
ernment will receive no greater than
Restricted Rights as defined in FAR 52.227-
19(c)(1-2) (June 1987). U.S. Government
users will receive no greater than Limited
Rights as defined in FAR 52.227-14
(June1987) or DFAR 252.227-7015 (b)(2)
(November 1995), as applicable in any
technical data.
Safety Notices
A WARNING or
!!INJURY
HAZARD!!
notice denotes a hazard. It
calls attention to an operating
procedure, practice, or the like that, if
not correctly performed or adhered to,
could result in personal injury or
death. Do not proceed beyond a
WARNING notice until the indicated
conditions are fully understood and
met.
CAUTION
!!DAMAGE
A
or
HAZARD!!
notice denotes a hazard. It
calls attention to an operating procedure,
practice, or the like that, if not correctly
performed or adhered to, could result in
damage to the product or loss of important
data. Do not proceed beyond a
notice until the indicated conditions are
fully understood and met.
CAUTION
Hide quick links:
Advertisement
Table of Contents
