Table of Contents
Advertisement
38
Chapter 3: Installation
VSpin User Guide
Deleting a Profile
Copying a Profile
3. Change the settings on the profiles page to suit your application.
For a list of settings on the Profiles page, see "About Profiles" on
page 12.
4. To save the changes to the profile, click
corner of the
VSpin Control
The profile is updated.
Delete a profile if you no longer need it.
To delete a profile:
1. Click the
tab at the top left of the
Profiles
The
page opens.
Profiles
2. Select the profile you want to delete from the selection box in the
Current VSpin Profile
3. Click
Delete profile
A confirmation dialog box opens, asking if you are sure you want to
delete the profile.
4. To delete the profile, click
The profile is deleted.
Copy a profile to quickly reproduce the settings from a profile that
already has most of the settings you need for your application. You can
then change the one or two settings that need to be different, and save
them as a new profile.
For example, if you want to spin two types of samples on one VSpin and
you want to set them up the same way, except for the maximum velocity,
you could set up a profile for the first sample type, copy the profile and
then modify the maximum velocity setting for the second sample type.
This is faster than making an entirely new profile.
To copy a profile:
1. Click the
tab at the top left of the
Profiles
The
page opens.
Profiles
2. Select the profile you want to copy from the selection box in the
Current VSpin Profile
3. Click
.
Copy profile
The
dialog box opens.
Copy Profile
Apply
dialog box.
VSpin Control
group box.
.
.
Yes
VSpin Control
group box.
in the lower right
dialog box.
dialog box.
Hide quick links:
Advertisement
Table of Contents
