Creating And Managing Profiles - Agilent Technologies Velocity11 VSpin User Manual

Creating and Managing Profiles

Overview
Creating a Profile
Editing a Profile
Before you can begin using your VSpin, you must create a profile.
After you have created several profiles, you can manage your profiles by
editing, deleting, copying or renaming them.
New profiles are created from the Profiles page. Create a new profile if
you want to store settings that are different from those stored in your
other profiles, or there are no existing profiles.
When you create a profile, the settings defined in "About Profiles" on
page 12 are stored in the new profile.
To create a profile:
1. Click the tab at the top left of the
Profiles
The page opens.
Profiles
2. If another profile is already open, close it.
3. Click .
Add profile
The dialog box opens.
Add Profile
4. Enter a profile name and click
The page settings from your current VSpin session are stored
Profiles
in this profile.
5. Configure the profile settings that you want from the
For a list of settings on the Profiles page, see "About Profiles" on
page 12.
6. To save the profile settings, click
the
VSpin Control
The profile is saved.
To edit a profile, you must select from a list of existing profiles on the
Profiles page.
To edit a profile:
1. Click the tab at the top left of the
Profiles
The page opens.
Profiles
2. Select a profile from the list box in the
box.
.
OK
in the lower right corner of
Apply
dialog box.
Current VSpin Profile
Chapter 3: Installation
VSpin User Guide
dialog box.
VSpin Control
page.
Profiles
dialog box.
VSpin Control
group
37