Where to Go Next
Choose the same plate as the type that you use for the sample
plate.
If you use something other than a plate, the object must have the
same dimensions as a plate so that it can be properly constrained
within the bucket. Consult Velocity11 with any questions.
3. From the
page, choose a bucket to hold the counterweight.
Control
For example, if you choose bucket 2:
a. Select
Bucket 2
page.
Control
b. Click
Go to bucket
The door opens on bucket 2.
4. Place the counterweight onto plate 2.
Be careful not to spill any fluid if you use a plate with fluid in its
wells.
The VSpin is now ready to spin sample plates on bucket 1 that are within
10 grams of the counterweight on bucket 2.
Before you start a spin, refer to the "Workflow Overview" on page 46.
in the
Bucket to Present
in the
group box.
Execute
Chapter 4: Performing a Spin
VSpin User Guide
group box on the
57