Agilent Technologies Velocity11 VSpin User Manual page 87

Opening and Closing
the Door
To lock the door:
1. Click the
Diagnostics
The page opens.
Diagnostics
2. Click in the
Lock door
The door locks, and cannot be opened without sending an unlock
command or unlocking it manually.
To unlock the door:
1. Click
Unlock door
The door unlocks.
!! INJURY HAZARD !!
10 pounds of force to any object that obstructs its movement.
This is not enough to break a finger for instance, but it could
cause abrasions or bruising.
You can command the door to open or close, unless the VSpin is
spinning.
The door must be closed before you can start a spin.
The door will not open until it is unlocked.
To open the door:
1. Click the
Diagnostics
The page opens.
Diagnostics
2. Verify that the door is unlocked by checking the
lights on the
Control
3. Click in the
Open door
The door opens.
To close the door:
1. Click in the
Close door
The door closes.
!! INJURY HAZARD !!
closing.
Chapter 5: Maintenance and Troubleshooting
tab at the top of the
Door Lock Actuator
in the
Door Lock Actuator
When the door closes, it applies
tab at the top of the
or pages.
Diagnostics
Door Open Actuator
Door Open Actuator
Keep hands clear of door during
VSpin User Guide
dialog box.
VSpin Control
group box.
group box.
dialog box.
VSpin Control
status
Door locked
group box.
group box.
77