Operating The Administration Terminal; Adjusting The Contrast; Entering A Configuration Programming Session; Entering An Administration Session - Northern Telecom Meridian 1 Installation And Maintenance Manual

Page 76 of 220 Programming the Meridian Companion system

Operating the Administration Terminal

Adjusting the contrast

Entering a Configuration programming session

Entering an Administration session

553-3601-200 Standard 7.00 November 1998
If you find the Administration Terminal's display difficult to read, you can
adjust the contrast.
Note: This feature will not work while you are in a Configuration,
Maintenance, or Administration session.
Press ƒ•‡ . The display shows Contrast level followed
1.
by the current contrast level expressed as a digit.
2. Press a dialpad button between 1 and 9 to select a new contrast level, or
press DOWN or UP .
or ® to select the contrast level you prefer.
OK
3. Press
Press ƒ••‚ .
1.
Enter the Installer password. The default password is ‚‚‚‚ (see
2.
"Changing passwords" on page 88).
If the password is correct, the display shows A. Configuration .
If the password is incorrect, the display shows Password: . Press RETRY
and enter the password again.
By using the arrow keys, you can select a programming category and find the
appropriate submenus for items you want to program.
Press ƒ••· . The display shows Password: .
1.
2. Enter the Administration password. The default password is
···· (see "Changing the Administration password" on
page 90).
If the password is correct, the display shows 1. Registration .
If the password is incorrect, the display shows Password: . Press RETRY
and enter the password again.