Northern Telecom Meridian 1 Installation And Maintenance Manual page 121

Configuring the Meridian 1 for the Meridian Companion system Page 111 of 220
Table 26 : LD 10—X11 release 24 with package 350: Configuring a WTN for a portable
Prompt
REQ
TYPE
TN
CDEN
DES
CUST
WRLS
MWUN
DN
CLS
CLS
CLS
CLS
CLS
Response
NEW
500
l s c u (Opt. 21-81)
l u (Opt. 11)
4D
d...d
0–99
YES/(NO)
(16)/32
x...x
CNDA/(CNDD)
MCRA/(MCRD)
(DTN)
XFA/(XFD)
THFA/(THFD)
Note: For system upgrades
If any TN on a Companion card is datafilled with the WRLS
prompt set to "no", you will need to remove "out" all the TNs
on the card and redatafill them with the WRLS prompt set to
"yes". If the WRLS prompt for all the TNs on a card are set to
"yes", change the MWUN prompt from "16" to "32" and datafill
TNs 16 to 31.
Meridian Companion Installation and Maintenance Guide
new telephone
telephone type
terminal number
quadruple density
FCC telephone designator
customer number
indicates that the TN corresponds to a portable
telephone; CLID is enabled as a default
changes card density for portable telephones
directory number assigned to the portable
user can see the name associated with the number
dialed if CPND is set up for the customer
Multiple Call Arrangement Allowed
(privacy)/Multiple Call Arrangement Denied (no
privacy)
digital signaling used by portable telephone (this is
the default only if WRLS = YES)
enabling transfer for the Transfer Radio Loss
function
enabling transfer across analog trunks
Meaning