Checking Consecutive Repetitions Of An Alarm Or Event; Erasing The Log - Northern Telecom Meridian 1 Installation And Maintenance Manual

Page 138 of 220 Maintenance

Checking consecutive repetitions of an alarm or event

Erasing the log

553-3601-200 Standard 7.00 November 1998
1. Enter the Event/Alarm log.
Press * or & to search through the alarms and events
2.
in the log.
3. Press REPEAT . The display shows the number of consecutive times that
the alarm or event occurred, then returns to the previous display.
1. Enter the Event/Alarm log.
2. Press ERASE . The display shows
3. Press YES . If no new alarms or events have been added since the list was
entered, the log is erased and the display shows
5.Evnt/Alrm Log
the list was entered, the display shows
Erase log?
. If new alarms or events have been added since
Log has changed
.
Log is empty
, then
.