Programming A System Default For Radio Loss Handling; Programming Individual Transfer On Radio Loss - Northern Telecom Meridian 1 Installation And Maintenance Manual

Page 116 of 220 Programming user options

Programming a system default for radio loss handling

Programming individual Transfer on Radio Loss

553-3601-200 Standard 7.00 November 1998
To program a system default telephone number for transferring a call on radio
loss, enter an Administration programming session and do the following:
Press ƒ••· and enter the Administration password.
1.
The display shows 1. Registration .
Press * . The display shows
2.
Press ^ . The display shows Radio loss hdlng .
3.
Press ^ to specify a default telephone number. The display
4.
shows Change Default .
Press ^ . The display shows the default number or None .
5.
6. Press CHANGE .
7. Enter up to 16 digits for the default phone number using 0 to 9 and *.
The * will add a two second pause. Use BKSP for corrections
8. Press OK to confirm the telephone number. The display shows
Change Default .
Press ® to exit.
9.
To program an individual telephone number for transferring a call on radio
loss, enter an Administration programming session and do the following:
Press ƒ••· and enter the Administration password.
1.
The display shows 1. Registration .
Press * . The display shows 2. User Options .
2.
Press ^ . The display shows Radio loss hdlng .
3.
Press ^ to specify a default telephone number. The display
4.
shows Change Default .
Press * . The display shows Change WTN: .
5.
6. Enter the WTN. The display shows Wccuu: .
2.
User Options .