Page 92 of 220 Programming the Meridian Companion system
553-3601-200 Standard 7.00 November 1998
7.
Enter a new one- to six-digit Registration password. Use BKSP for
corrections.
8.
Press OK . The display shows Re-enter: .
Note: If you do not enter any digits and press OK , the display shows
Pswd not changed .
9.
Reenter the digits and press OK . The display shows
Password changed .
If the display shows Pswd not changed , you did not enter the same
password again. Go back to step 6.
10.
Record the new Registration password in Meridian Companion
Programming and Provisioning Record.
Press ® to exit or press * to continue in Administration
11.
programming.
Need help?
Do you have a question about the Meridian 1 and is the answer not in the manual?
Questions and answers