X11 Release 20B Or Greater With Package 240 - Northern Telecom Meridian 1 Installation And Maintenance Manual

Configuring the Meridian 1 for the Meridian Companion system Page 105 of 220
Table 16 :LD 10—X11 release 15 or greater without package 240: Configuring a
TN for a portable
Prompt
REQ
TYPE
TN
CDEN
DES
CUST
DIG
DN
MARP
CPND
CLS
CLS

X11 release 20B or greater with package 240

Before programming, refer to the list of users in the Meridian Companion
Programming and Provisioning Record for information needed to set the
Multiple Call Arrangement Allowed/Multiple Call Arrangement Denied
(MCRA/MCRD) Wireless Privacy feature.
To access Meridian Companion features such as CPND/CLID display and
wireless privacy on the Meridian 1 system, package 240 must be installed and
enabled, and WRLS set to YES.
If package 240 is not enabled, the WRLS prompt does not appear.
CNDA/CNDD and MCRA/MCRD cannot be accepted as values for CLS, and
Response
NEW
500
l s c u (Opt. 21-81)
l u (Opt. 11)
4D
x...x
0–99
<cr>
xxx...x
YES/(NO)
DTN
XFA THFA
Meridian Companion Installation and Maintenance Guide
new telephone
telephone type
terminal number
quadruple density
ODAS telephone designator. Enter one- to six-
character alphanumeric ODAS designator.
customer number
directory number
use TN as the MADN redirection prime
enabling transfer for the Transfer Radio Loss
function
Meaning