Enabling And Disabling Registration; Locking Registration On (Optional) - Northern Telecom Meridian 1 Installation And Maintenance Manual

Page 120 of 220 Registering and verifying portable telephones

Enabling and disabling registration

Locking Registration on (optional)

553-3601-200 Standard 7.00 November 1998
When you distribute the portables, inform the users that the portables are
registered and give them the corresponding slot numbers. Portables can be
registered to a maximum of nine different Companion systems.
To register the portables you perform the following:
• Enable registration for the Meridian Companion system and ensure there
are sufficient credits.
• Register the portables.
• Verify the operation of each portable.
• Disable registration for the Meridian Companion system.
You must enable registration for the entire Meridian Companion system to
allow individual portables to register. The options are Yes (
indicates that Master Registration is enabled. No is the default and indicates
that Master Registration is not enabled.
Note: To prevent interference problems with neighboring systems, set the
Master Registration to
registered.
Press ƒ••· and enter the Administration password. The
1.
display shows 1. Registration .
Press ^ . The display shows
2.
the currently set Master Registration setting,
3. To change to the other setting, press CHANGE .
To continue in Administration programming, press * , or to
4.
exit, press ® to exit.
Mstr Reg Enbl:
automatically returns to
registration. It is recommended that you allow Registration to time out in most
circumstances. Leaving Registration enabled can interfere with registration in
neighboring systems. However, if you are registering a large number of
portables and do not want registration to time out, you can lock it on.
N
when the portables are no longer being
Mstr Reg Enbl:
N
30 minutes after the last
Y N
) and No ( ). Yes
followed by
Y N
or .