Meridian 1 Card Maintenance - Northern Telecom Meridian 1 Installation And Maintenance Manual

Page 126 of 220 Maintenance

Meridian 1 card maintenance

Table 33 : Maintenance and diagnostic commands in LD 32
Commands
STAT l s
STAT (loop)
STAT l s c
STAT l s c u
ENLC l s c
ENLL loop
ENLN loop
ENLS l s
ENLU l s c u
DISC l s c
DISI l s c
DISL loop
DISN loop
DISS l s
DISU l s c u
553-3601-200 Standard 7.00 November 1998
Table 33 shows commands available in LD 32 for the CMCC, CMRC, CMLC,
and CMBC. For additional information on these commands, refer to X11
Input/Output Guide. Some of the commands vary slightly for Option 11
systems (refer to Option 11 documentation).
System responses
shows status
shows status
shows status
shows status
enables card
enables loop
enables card
enables shelf
enables unit
disables card
disables card
disables loop
disables network
card
disables shelf
disables unit
Description
indicates whether unit is idle, busy, or disabled
indicates status of loop
indicates status of specified card
indicates status of specified unit
enables the specified card
enables network loop
enables network card with specified loop
enables specified shelf
specified unit enabled
removes specified card and associated TNs
from operation
disables specified card when it becomes idle
disables network loop
disables network card containing specified
loop
disables all cards on specified shelf
disables specified unit