Checking When An Event Occurred; Checking The Most Recent Alarm; Checking Consecutive Repetitions Of An Event Or Alarm - Northern Telecom Meridian 1 Installation And Maintenance Manual

Page 140 of 220 Maintenance

Checking when an event occurred

Checking the most recent alarm

Checking consecutive repetitions of an event or alarm

553-3601-200 Standard 7.00 November 1998
5. Press ALARM . The display shows an alarm code if there is a current
alarm.
Press * or & to search through events in the log.
6.
7. Press TIME to see the date and time of an alarm's most recent occurrence.
8. Press REPEAT to see how many times the alarm has occurred.
9. To erase the log, press ERASE .
Note: If new alarms have occurred since the log was accessed, the
display shows
shows
Press % to continue in Maintenance programming.
10.
1. Enter the Administration log.
Press * or & to search through the events in the log.
2.
3. Press TIME . The display shows the date and time that the event last
occurred, then returns to the previous display.
1. Enter the Administration log.
2. Press ALARM . The display shows an alarm code if there is an uncleared
No current alarm
alarm, or
1. Enter the Administration log.
Press * or & to search through the events in the log.
2.
3. Press REPEAT . The display shows the number of consecutive times that
the event or alarm occurred, then returns to its previous display.
Log has changed
Log is empty
.
(see Table 42 on page 183).
. Otherwise, the display