Installing A Remote Access Device - Northern Telecom Meridian 1 Installation And Maintenance Manual

Page 46 of 220 Installing the hardware

Installing a Remote Access Device

553-3601-200 Standard 7.00 November 1998
Note: Ensure that an IRQ setting is available before selecting it. If equipment
connected to your PC is turned off, is not currently active, or if a driver
is not running, the IRQ setting may appear as available.
For example, you may select IRQ7 for the PCI card, but a printer may
be using IRQ7. You may not be able to print a file when the PCI
application is active.
If an IRQ is not available in the range 3 to 7, you may be able to reconfigure
equipment to use a higher IRQ setting. If you are running Windows 95, you
can view the equipment and the IRQ setting:
1. Press START and select Settings/Control Panel.
2. Double-click on the System icon to open the System Properties.
3. Select the Device Manager tab and press the Properties button.
4. Select the Interrupt request radio button.
Note: Older equipment may not show up in this list.
For more information on installing the PCI card, refer to PCconfig
on-line help.
Refer to Companion Remote Access Device Installation Guide.