Page 170 of 220 Maintenance
Config ambiguous
553-3601-200 Standard 7.00 November 1998
2.
To keep the new configuration, you must press RESET . This triggers the
installation procedure. A warning message informs you that all data will
be erased.
The Config ambiguous alarm occurs because
•
there is one or more empty slots between cards
•
a known module has not reported a location
•
the system cannot identify a CMBC without at least one powered Base
Station connected to it
•
the system cannot identify a CMBC to the right of another CMBC that
does not have at least one powered Base Station connected to it
Correct the problem and press RESUME.