Northern Telecom Meridian 1 Installation And Maintenance Manual page 116

Page 106 of 220 Configuring the Meridian 1 for the Meridian Companion system
Table 17 : LD 10—X11 release 20B or greater with package 240: Configuring a WTN for
a portable
Prompt
REQ
TYPE
TN
CDEN
DES
CUST
WRLS
DN
CLS
CLS
CLS
CLS
553-3601-200 Standard 7.00 November 1998
an error message appears. (LD 83, available with X11 release 20B, prints a list
of wireless sets.)
There is one exception to the package 240 requirement: if package 131 is on,
MCRA/MCRD is an acceptable CLS value. If the package is not on, use the
steps described in "X11 release 15 or greater without package 240" on
page 104 to program the Meridian Companion portable telephones.
See Table 16 for the prompts and responses in LD 10 that apply to Meridian
Companion. The defaults appear in parentheses and new prompts are bolded
in Table 17.
Response
NEW
500
l s c u (Opt. 21-81)
l u (Opt. 11)
4D
d...d
0–99
YES/(NO)
xxx...x
CNDA/(CNDD)
MCRA/(MCRD)
(DTN)
XFA/(XFD)
new telephone
telephone type
terminal number
quadruple density
FCC telephone designator
customer number
indicates that the TN corresponds to a portable
telephone; CLID is enabled as a default
directory number assigned to the portable
user can see the name associated with the number
dialed if CPND is set up for the customer
Multiple Call Arrangement Allowed
(privacy)/Multiple Call Arrangement Denied (no
privacy)
digital signaling used by portable telephone (this is
the default only if WRLS = YES)
enabling transfer for the Transfer Radio Loss
function
Meaning