Northern Telecom Meridian 1 Installation And Maintenance Manual page 157

a. Press CHANGE . The display shows
change the hour, go to step 3c.
b. Enter the hour in 12-hour or 24-hour format, as one or two digits.
c. Press * . The display shows
current scheduled minutes (
want to change the minutes, go to step 3f.
d. Press CHANGE . The display shows
e. Enter the minutes as one or two digits.
f. Press * . If you entered an hour less than or equal to 12, the
display prompts you with
than 12, go to step 4a to set the date or go to step 5 to continue in
Configuration programming.
g. Press CHANGE to select AM or PM.
To schedule the date, press * . The display shows
4.
followed by the current scheduled date (today's date if none scheduled).
If you do not want to change the scheduled date, press % four
times to continue in Configuration programming. (You may hear a beep
after the first % .)
To continue scheduling the date
a. Press CHANGE . The display shows
scheduled year. If you do not want to change the year, go to step 4d.
b. Press CHANGE . The display shows
c. Enter the last two digits of the year.
d. Press * . The display shows
current scheduled month. If you do not want to change the month, go
to step 4g.
e. Press CHANGE . The display shows
f. Enter the month as one or two digits between 1 and 12.
g. Press * . The display shows
scheduled day. If you do not want to change the day, go to step 5.
h. Press CHANGE . The display shows
01
AM
or
Meridian Companion Installation and Maintenance Guide
Maintenance Page 147 of 220
Hour: .
If you do not want to
Minutes:
followed by the
if none scheduled). If you do not
Minutes:
.
PM
. If you entered an hour greater
Year:
followed by the currently
Year:
.
Month:
followed by the
Month:
.
Day:
followed by the current
Day:
.
Date