Table of Contents
Advertisement
15
Adjustments
Figure 55: Adjusting the mechanical brake for the Navigator
M6
1568911, Edition 2019-04, Version 0
15.1 General safety instructions
Electric shock hazard
Electrical supply cables are laid in the pendant system.
Contact with energised components presents a danger to
life from electric shock. Disconnect the appliance from the
mains before any adjustment work:
• Disconnect all poles of the pendant system from the
mains and prevent it from being switched back on
again.
• Make sure that all the appliances connected via the
Navigator M6 are de-energised.
15.2 Adjusting the mechanical brake for the Naviga-
tor M6
(See "Figure 55")
The mechanical brake (friction brake) on the console tube keeps the Nav-
igator M6 in its adjusted position for all versions.
Adjust the brake force of the adaption (with the appliance placed on the
shelf) such that the adaption remains stable in any adjusted position and
can still be conveniently adjusted.
Follow the safety instructions
Follow the general safety instructions prescribed in Chapter 15.1 on
Page 72.
Tool to be used
Use a suitable slotted screwdriver.
To increase the brake force
•
Insert the slotted screwdriver into the brake screw① and turn in the
clockwise direction.
To reduce the brake force
•
Insert the slotted screwdriver into the brake screw① and turn in the
anti-clockwise direction.
•
Perform a function test.
72
WARNING
EN
Advertisement
Table of Contents
