Table of Contents
Advertisement
14
Mounting the Canopy, Cover Caps and the Cover Panels
Figure 53: Mounting the front side panels to the motor arm
Figure 54: Mounting the front upper cover to the motor arm
14.7 Mounting the front side panels to the motor arm
(See "Figure 53")
The Figure shows the motor arm
extension arm with motor arm
version is identical.
5
The Figure shows a simplified representation with only the motor arm
without cables.
1.
Place the right-hand side cover panel① and insert 2 plastic pins⑤
into the holes⑥ in the motor arm.
•
Make sure that the cover plate④ protrudes into the guide (not illus-
trated in the Figure) of the side cover panel①.
2.
Attach the left-hand side cover panel③ to the mounting fixture② on
the front of the right-hand side cover panel①, route it to the motor
arm and then insert 2 plastic pins⑤ into the holes⑥ in the motor
arm.
3.
Make sure that the cover plate④ protrudes into the guide (not illus-
trated in the Figure) of the side cover panel③.
4.
Gently push the 2 straps⑦ at the bottom of the side cover panels in-
to each other and engage them with each other.
5.
Check that the side cover panels are securely in place:
•
The cover plate must slide in the guides (not illustrated in the Figure)
of the side cover panels.
•
The side cover panels must engage tightly with each other without
gaps.
14.8 Mounting the front upper cover to the motor arm
(See "Figure 54")
The Figure shows the motor arm
extension arm with motor arm
version is identical.
5
The Figure shows a simplified representation with only the motor arm
without cables.
1.
Place the cover① from above and attach one of the 2 axes④ to the
mounting fixture⑤ of the side cover panel.
2.
Gently pull the front upper cover① apart and attach the second
axis④ to the mounting fixture⑤ of the side cover panel.
3.
Fold down the cover① until the 2 latches② snap into place.
4.
Check that the cover① is securely in place:
•
The guides③ of the cover① must sit in the side cover panels.
•
The cover① must sit on the side panels without gaps.
71
. The installation procedure for the
4
or the XL extension arm with motor arm
5
. The installation procedure for the
4
or the XL extension arm with motor arm
5
1568911, Edition 2019-04, Version 0
EN
4
4
Advertisement
Table of Contents
