Table of Contents
Advertisement
7
Pre-Assembly: Mounting an Extended Ceiling Tube
Figure 19: Subsequently mounting the earthing cable to the
ceiling tube
7.2.3 Subsequently mounting the earthing cable to the ceiling
tube
(See "Figure 19")
The system is delivered with the earthing cable pre-assembled!
1.
Fit 1 lock washer S4②/④ each above and below the ring cable
lug③ of the earthing cable 4mm² (approx. 1m long) included in the
scope of delivery.
2.
Using 1 Allen cylinder screw M4 x 12mm – DIN 912① screw the
ring cable lug③ and the lock washers S4②/④ onto the earthing
point⑤.
3.
Tighten the Allen cylinder screw M4 x 12mm①.
4.
Continue the installation as described in Chapter 8 on Page 36.
35
1568911, Edition 2019-04, Version 0
EN
Advertisement
Table of Contents
