Table of Contents
Advertisement
14
Mounting the Canopy, Cover Caps and the Cover Panels
Figure 51: Mounting the rear side panels to the motor arm
Figure 52: Mounting the lower, rear covers to the motor arm
1568911, Edition 2019-04, Version 0
14.5 Mounting the rear side panels to the motor arm
(See "Figure 51")
The Figure shows the motor arm
extension arm with motor arm
version is identical.
5
The Figure shows a simplified representation with only the motor arm
without cables.
1.
Place the first side cover panel① and insert 3 plastic pins③ into the
holes② in the motor arm.
•
Make sure that the cover plate⑥ protrudes into the guide⑤ of the
side cover panel①.
2.
Place the second side cover panel and insert 3 plastic pins③ into
the holes② in the motor arm.
•
The cover plate⑥ must protrude into the guide⑤ of the side cover
panel① and the 3 locking devices④ on the 2 side cover panels must
engage with each other.
3.
Check that the side cover panels are securely in place:
•
The 3 locking devices④ must be connected with each other.
•
The cover plate⑥ must slide in the guides⑤ of the side cover pan-
els.
•
The side cover panels must engage tightly with each other without
gaps.
14.6 Mounting the lower, rear covers to the motor
arm
(See "Figure 52")
The Figure shows the motor arm
extension arm with motor arm
version is identical.
5
The Figure shows a simplified representation with only the motor arm
without cables.
1.
Hold the cover② in the angle illustrated in the Figure.
2.
Insert the joint④ of the rear, lower cover② into the 2 mounting
fixtures③ in the upper side cover panels①.
3.
Fold up the cover② such that the 2 latches⑤ snap into place.
4.
Check that the cover ② is securely in place:
•
The guides⑥ of the cover② must sit in the side cover panels①.
•
The cover② must sit in the side cover panels① without gaps.
5.
Insert 2 Allen countersunk screws M3 x 10mm⑦ into the
openings⑧ in the cover② and tighten them.
70
. The installation procedure for the
4
or the XL extension arm with motor arm
5
. The installation procedure for the
4
or the XL extension arm with motor arm
5
EN
4
4
Advertisement
Table of Contents
