Nuvo Navigator Lift 150 Single Installation Instructions Manual page 49

11 Mounting Cables
Figure 31: Connecting the cables to the extension arm with motor arm Dual arm, with Navigator M6
Table 02: Cable assignment: extension arm with motor arm Dual arm, with Navigator M6
No. in From
Fig. 31
② Distributor board
⑥ Main board
⑦ Main board
⑧ Motor
⑨ End switch
⑩ Navigator M6
⑫ Assembly
connection⑪
⑭ Bearing point (bot-
tom)
⑮ Assembly
connection⑰
⑯ Bearing point (top) Assembly
⑱ Mains connection
To Designation
DC/DC converter Power Board - Distr. Board cable
DC/DC converter Power board / DC converter Power cable
DC/DC converter Power board / DC converter cable
Main board Motor connecting cable
Main board End switch board
Assembly Navigator M6 interface / Navigator M6
connection⑪ socket cable
Main board Control cable
Distributor board -
Distributor board Brake1/PCB, 2-arm cable
-
connection⑰
Main board Mains cable
49
Length Remark
[mm]
- Pre-assembled
- Pre-assembled
- Pre-assembled
- Integrated in the motor
Pre-assembled
- Integrated in the Navigator M6
- Pre-assembled
- Integrated in the bearing unit
1300 Extension arm length = 600/800
1700 Ext. arm length = 1000/1200
2100 Extension arm length (XL only) =
1400/1600 (pre-assembled)
- Integrated in the bearing unit
4000 -
1568911, Edition 2019-04, Version 0
EN