Connecting The Optional Accessories To The Motor Arm Single Arm, With Navigator M6; Connecting An Optional Brake Indicator; Connecting An Optional Sound Or Lighting Cable - Nuvo Navigator Lift 150 Single Installation Instructions Manual

11 Mounting Cables
1568911, Edition 2019-04, Version 0
11.9 Connecting the optional accessories to the motor arm Single
arm, with Navigator M6
The cables are pre-assembled by Nuvo. The instructions in the paragraphs below only re-
fer to the connection or replacement of cables.
1. Observe the safety instructions in Chapter 11.2 on Page 46.

11.9.1 Connecting an optional brake indicator

(See "Figure 36")
2. Plug the 2 cable plugs ② of the brake indicator onto the corresponding DC/DC con-
verter socket① as illustrated in the Figure.
3. Plug 2 cables each onto the brake indicator as described in Chapter 10.2, "Mounting
the brake indicators (for retrofit only)", on page 45.

11.9.2 Connecting an optional sound or lighting cable

(See "Figure 36")
4. Establish the assembly connection⑤ between the cable④ and the extension
cable ⑥.
5. Route the extension cable ⑥ in the protective tube through the bow⑦, mount the
strain relieving mechanism⑦ and plug the cable plug onto the corresponding main
board socket③ as illustrated in the Figure.
56
EN