Nuvo Navigator Lift 150 Single Installation Instructions Manual page 5

7 Pre-Assembly: Mounting an Extended Ceiling Tube
7.1 Components described in this chapter
7.2 Mounting an extended ceiling tube
7.2.1 Mounting a ceiling tube
7.2.2 Mounting the strain relieving mechanism in the ceiling tube
7.2.3 Subsequently mounting the earthing cable to the ceiling tube
8 Mounting the Ceiling Tube to the Threaded Bolts of the Interface Plate
8.1 Components described in this chapter
8.2 Mounting a ceiling tube
8.3 Aligning the motor arm / extension arm with the interface plate, Single
8.4 Aligning the motor arm / extension arm with the interface plate, Duo
9 Mounting the Console Tube to the Motor Arm
9.1 Components described in this chapter
9.2 Mounting the console tube to the motor arm
9.3 Positioning the Navigator M6 under the console tube
10 Mounting Optional Accessories
10.1 Mounting the Extension Arm Lighting (for Retrofit only)
10.2 Mounting the brake indicators (for retrofit only)
11 Mounting Cables
11.1 Versions
11.2 Safety instructions
11.3 Swinging out / retracting the electronic unit
11.3.1 Swinging out the electronic unit
11.3.2 Retracting the electronic unit
11.4 Connecting cables to the extension arm with motor arm Dual arm,
with Navigator M6
11.4.1 Routing the cables from the distributor board to the DC/DC converter
11.4.2 Routing the cables from the main board to the DC/DC converter
11.4.3 Connecting the motor and the end switch
of the height adjustment mechanism
11.4.4 Connecting the control cable of the brakes and
the height adjustment mechanism
11.4.5 Connecting the electromagnetic brakes
11.4.6 Mounting the power cable
11.5 Connecting optional accessories to the extension arm
with motor arm Dual arm, with Navigator M6
11.5.1 Connecting the optional brake indicators
11.5.2 Connecting an optional sound or lighting cable
11.5.3 Connecting the optional extension arm lighting
11.6 Connecting earthing cables to the extension arm with motor arm Dual arm,
with Navigator M6
11.7 Routing the supply cables and hoses through the extension arm
with motor arm Dual arm, with Navigator M6
11.8 Connecting the cables to the motor arm Single arm, with Navigator M6
11.8.1 Routing the cables from the main board to the DC/DC converter
11.8.2 Connecting the motor and the end switch
of the height adjustment mechanism
11.8.3 Connecting the control cable of the brakes
and the height adjustment mechanism
11.8.4 Connecting the electromagnetic brake
11.8.5 Mounting the power cable
11.9 Connecting the optional accessories to the motor arm Single arm,
with Navigator M6
11.9.1 Connecting an optional brake indicator
11.9.2 Connecting an optional sound or lighting cable
5
1568911, Edition 2019-04, Version 0
EN
32
32
33
33
34
35
36
36
37
38
40
42
42
43
43
44
44
45
46
46
46
47
47
47
48
48
48
48
48
48
48
50
50
50
50
52
52
54
54
54
54
54
54
56
56
56