5G NR Measurements Using the VSA Software
5G Waveform and EVM Analysis Using VSA Software
6. Use File Select to navigate to:
7. Select Enable Vector Modulation Signal.
8. Close the Vector Modulation Signal Setup window.
9. Select the Adjustments block and select Optimize Dynamic Range with
M9383B/84B Measurement Guide
D:\Users\Instrument\Documents\Keysight\PathWave
\SignalGenerator\Examples
and choose
5GNR_1CC_FR2_120kHz_SCS_100MHz_256QAM_DCPunctured_28GHz.wfm
then Select.
OBW and Enable System RF Flatness Correction.
Optimize Dynamic Range with OBW This setting filters the system
RF flatness correction coefficients over the instantaneous bandwidth
indicated in the waveform header (or in the "Occupied Bandwidth"
97