Keysight M9383B Measurement Manual page 73

5G New Radio (NR) Measurements using X-Apps
5G Waveform, EVM, and ACP Analysis Using X-Applications
Add More Windows to View Additional Carriers to the Display
You can use the View Editor function in the N9040B to add more windows for
the current measurement. In this example, we will add three more windows to
view measurement results for 3 carriers.
M9383B/84B Measurement Guide
c. Select Meas Setup > Advanced tab > Advanced Demod Setup and
select both DC Punctured and Multi-Carrier Filter to turn on.
d. Ensure that RF for Phase Compensation is not selected and the
value is 0 Hz, then Close the Advanced Settings table.
The N9040B will take a minute to update the display data.
73