Keysight M9383B Measurement Manual page 139

5G NR Measurements Using the VSA Software
5G Waveform and EVM Analysis Using VSA Software
Equipment Setup for the M9384B
— M9384B CH1 front panel RF Out to UXR front panel CH1
— M9384B CH2 front panel RF Out to UXR front panel CH3
— M9384B rear panel TCH1 Sync Out to UXR rear panel Aux Trig In
Using the graphical user interface
On the VXG:
1. Select Preset to set the VXG to a known state:
2. In the Output area for both Channel 1 and Channel 2, set Frequency to 
3. In the Configuration area, change the signal configuration from
M9383B/84B Measurement Guide
28 GHz and Power to 0 dBm.
Independent to 2 Tx Coherent.
139