Keysight M9383B Measurement Manual page 62

5G New Radio (NR) Measurements using X-Apps
5G Waveform, EVM, and ACP Analysis Using X-Applications
Using the equivalent SCPI programming example
On the VXG:
SYSTem:PRESet
RF1:FREQuency:CW 28GHZ
RF1:POWer:AMPLitude 5dBm
SIGNal1:MODE WAVeform
SIGNal1:WAVeform:TRIGger:SYNC:MARKer M2
Navigate to the desired waveform file.
SIGNal1:WAVeform "D:\Users\Instrument\Documents\demo
waveforms
5GNR_1CC_FR2_120kHz_SCS_100MHz_256QAM_DCPunctured_28GHz.
wfm"
SIGNal1 ON
DM:OPTimization:CHANnel EVM
RFALl:OUTPut ON
RF1:OUTPut ON
For multi-channel instruments, set RF Out (all) to On.
RFALl:OUTPut ON
On the N9040B:
Navigate to the desired waveform file.
All example waveforms and setup files are located on the VXG at:

D:\Users\Instrument\Documents\Keysight\PathWave
\SignalGenerator\Examples

You will need to copy over the setup files to the N9040B or the PC running
the VSA application.
MMEMory:LOAD:EVM:SETup CC0,
"D:\Users\Instrument\Documents\NR5G\data\NR5GEvm\CarrierSetu
p\5GNR_1CC_FR2_120kHz
SCS_100MHz_256QAM_DCpunctured_28GHz.scp"
EVM:CCARrier0:TIME:LENGth:SEARch 10ms
EVM:CCARrier0:TIME:LENGth:RESult 2
EVM:CCARrier0:FRAMe:TRIGger ON
EVM:CCARrier0:DC:PUNCture ON
62

M9383B/84B Measurement Guide