5G New Radio (NR) Measurements using X-Apps
5G Waveform, EVM, and ACP Analysis Using X-Applications
2. In the middle right window, select the Window Title.
3. In the bottom right window, select the Window Title.
4. In the bottom left window, select the Window Title > Data dropdown >
5. Now you must optimize the settings for CC1.
72
a. Select the Data dropdown and select Pre-demod > Spectrum.
b. Select the Data dropdown again and select Component Carrier >
CC1.
a. Select the Data dropdown and select Tables > Error Summary.
b. Select the Data dropdown again and select Component Carrier >
CC1.
Tables >Error Summary.
a. Select Meas Setup > and set Component Carrier to CC1:
b. Select Meas Time and set:
— Search Length to 10 ms
— Result Length to 2 Sub Frame
— Frame Trigger to On
M9383B/84B Measurement Guide