5G NR Measurements Using the VSA Software
5G Waveform and EVM Analysis Using VSA Software
4. From the menu bar, select MeasSetup > Measurement Type > Cellular >
5. Select MeasSetup > 5G NR Demod Properties > Configuration tab >
6. Select the BWP pane and confirm that DL-BWP is enabled. We will use the
158
5G NR.
Carrier pane and note that the Num of Meas. Channels is set to 2.
default settings of:
— Numerology =
— RB Offset = 0 RB
— RB Number = 273 RB
1:30 kHz
M9383B/84B Measurement Guide