5G New Radio (NR) Measurements using X-Apps
5G Waveform, EVM, and ACP Analysis Using X-Applications
6. In the Waveform Playback Setup area, use File Select to navigate to:
7. Select Enable Vector Modulation Signal.
8. Close the Signal block.
9. Select the Adjustments block and select Optimize Dynamic Range with
M9383B/84B Measurement Guide
D:\Users\Instrument\Documents\Keysight\PathWave
\SignalGenerator\Examples
and choose
5GNR_1CC_FR2_120kHz_SCS_100MHz_256QAM_DCPunctured_28GH
z.wfm
then Select.
OBW and Enable System RF Flatness Correction.
57