Table of Contents
Advertisement
BATCH FEATURES
Batch Mode
This option specifies whether to store labels in the handheld while disconnected from
the base. Options are as follows:
•
•
•
$CBTBM00
Batch Mode = Automatic
$CBTBM02
Send Batch
When the reader is configured in Manual Batch Mode, use the following bar code to ini-
tiate sending of labels stored in batch memory.
BATCH FEATURES
Disabled — The handheld will not store/batch labels.
Automatic — The handheld will store labels to RAM when the handheld goes out
of range and is disconnected from the remote device.
Manual — The handheld will always store labels to Flash memory. The user must
manually send the stored labels to the remote device using a special "batch send"
label.
NOTE: Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this bar code.
ENTER/EXIT PROGRAMMING MODE
Batch Mode = Disable
$CBTBM01
Batch Mode = Manual
Send Batch
BatchSend
PRODUCT REFERENCE GUIDE
263
Advertisement
Table of Contents
