Osc - DiGidot C4 Manual

Select 'TIME' for triggers that have to be activated on specific times. These triggers will be fired only
once when the defined time is reached. The DiGidot C4 will not activate the trigger retroactively.
TIME:
Every: Repeating frequency of this trigger, e.g. every 'day' or every 'week' etc.
‣
Time and period fields: Define a date, time, period, etc. (multiple inputs possible depending
‣
on chosen frequency).
Digital trigger commands
You can send specific commands from external systems and devices to trigger various actions. These
digital triggers are very useful for system integration and automation.
This also allows users to incorporate control over the DiGidot C4 in other software programs.
Detailed API information can be found in our DiGidot C4 API document on our website, go to
digidot.eu/support/documentation
If you need further API information, please contact us.

OSC

Home > Triggers > select '+' to add a trigger > select 'OSC'
OSC (Open Sound Control) is a protocol that is often being used in audio and video applications in
order to send data over a network. Due to the open and easy to use standard and various low cost
OSC applications to create user interfaces, this protocol is ideal to be used in lighting applications.
There are various third party OSC applications that reported to work in combination with the DiGidot
C4. A few apps that we can recommend are
ON LX Ltd. Please note that DiGidot does not offer any support for third party apps and softwares.
Enable OSC trigger
Before creating OSC triggers, OSC must be enabled first. This can be done by creating an OSC trigger
and press the 'enable' link or do the following steps:
1. Go to:
Home > Triggers > click on the 3 dots in the top right blue bar > select 'HTTP, UDP and OSC'
2. Enable the OSC triggers option and click the 'save' button.
Add an OSC trigger
An OSC trigger can be created in two ways:
If..
1. Learn an incoming OSC Address
> Press the 'LEARN' button and send the Address from an OSC app or software.
Note that the OSC sending application must be connected to the C4 network and the correct
IP address of the recipient must be set.
C4 Manual
TouchOSC from hexler.net,
Version 2.1.5
https://
Lemur from Liine or Ctrl from
40 74 -