Configuring Wi-Fi For Digidot App Access - DiGidot C4 Manual

network cable in one of the RJ45 network ports of the DiGidot C4 and into the computers Ethernet/
UTP port.
NOTE: Please note that changing your Ethernet settings can prevent you from reaching
the Internet and/or other devices in your network.
To stay connected to the Internet and use the online update and upgrade functions, it is required to
use a computer with multiple network connections (LAN or Wi-Fi).
It's recommended to write down what your current network configuration is in
order to restore these settings after you finished the configuration process if necessary.
Some laptops switch between Wi-Fi or Ethernet, in these cases you cannot have both connections
simultaneously. This can be solved by using a third party Ethernet dongle.
On Windows computers go to:
Control Panel > Network and Internet > Network and Sharing Centre > Ethernet > Properties >
Internet Protocol Version 4 (TCP/IPv4) > Use the following network settings:
IP Address
The static IP address of your computer
Subnet mask
Network broadcast range of your computer
Gateway
Router for Internet access
On Mac computers go to:
System Preferences > Network > Ethernet > Configure IPv4 > Manually > Use the following
network settings:
Network Settings
IP Address
The static IP address of your computer
Subnet mask
Network broadcast range of your computer
Gateway
Router for Internet access
Your computer is now ready to access the DiGidot C4.
Open your web browser and go to http://10.254.254.254.
Configuring Wi-Fi for DiGidot app access
You can get wireless access to the DiGidot C4 fast and easy by following these 5 steps.
C4 Manual
10.0.0.1
255.0.0.0
0.0.0.0
Values
10.0.0.1
255.0.0.0
(empty)
Version 2.1.5 28 74 -