DiGidot C4 Manual page 57

Gateway
The gateway of the network.
Wi-Fi name (SSID)
The Wi-Fi network name that will be found by your device when scanning for wireless networks.
Wi-Fi security
The Wi-Fi security protocol can be set to open or secured (WPA2).
Password
The Wi-Fi password that's required to connect to the Wi-Fi network. (minimum of 8 characters)
Hide SSID
Hide or show the Wi-Fi network name when devices search for Wi-Fi connections. When hidden you
can only connect to the acces point by manually entering the SSID.
Channel
Wi-Fi channel can be set between 1 and 14 or you can choose for 'auto'.
Enable DHCP
Enable or disable the DHCP server. When enabled the DiGidot C4 will assign IP Addresses to devices
that connect to the access point. The built in DHCP server is smart and detects and adapts if there is
already a DHCP server present in the network.
DHCP start IP Address
This is the starting IP Address of the IP Address range that the DiGidot C4 can assign to other devices
in the network.
DHCP end IP Address
This is the last IP Address of the IP Address range that the DiGidot C4 can assign to other devices in
the network.
Enable BSSID
Enable the use of BSSID
Access Point settings example
IP Address:
Subnet-mask:
Security Wi-Fi:
Wi-Fi password
Wi-Fi name:
Wi-Fi channel:
Hide SSID:
Enable DHCP:
DHCP start IP Address
DHCP end IP Address
Enable BSSID
C4 Manual
172.16.0.1
255.0.0.0
Secured
123456789
DiGidot C4 Wi-Fi
Auto
Disabled
Enabled
172.16.0.2
172.16.0.30
Disabled
Version 2.1.5 57 74 -