Settings Overview; Inputs & Outputs Configuration (Manual Configuration) - DiGidot C4 Manual

IP Address
This is the device IP Address.
Wi-Fi
This is the status of the onboard Wi-Fi module.
Universe(s)
This shows the configured universe(s) that the DiGidot C4 listens to. There are two statuses:
Red numbers indicate that no Art-Net data present.
‣
Green numbers indicate that Art-Net data is present.
‣
Click on the device universes to open the Art-Net Watcher window, to monitor the incoming channel
values.
Port
This shows which ports have been configured as an output.
If you click on a port, it will highlight the DiGidot C4 output until you click again.
Actions
Restart: will restart all devices that are currently selected and displayed on the Monitor page.
Highlight: will highlight all configured outputs of all selected and displayed devices on the Monitor
page.
To select more or less devices, click on the "ALL DEVICES" button (select-box in the top bar) and
select the preferred device or group.

Settings overview

Home > Settings
This page shows all settings and device configuration items.
Inputs & outputs configuration
Home > Settings > In/out configuration
On this page you can manually configure the inputs and outputs.
Choose the output type (or DMX input) for these ports. Then click the blue + icon of each port to add
universes. To edit the output options, click the universe item.
The DiGidot C4 is able to output one SPI protocol type simultaneously. If you select an SPI protocol
for one port, this protocol will be used for all other output ports.
You can however make a combination of 'DMX input' or 'DMX output'.
Combining ports example:
C4 Manual
(manual configuration)
Version 2.1.5 51 74 -