Getting Started; Scenes (Digidot C4 Extended Only); Create Scenes - DiGidot C4 Manual

Getting started

Home > Getting started
In order get started quickly or if you're new to using the DiGiDot C4, we recommend using the Getting
Started wizard from the Home menu. This wizard will guide you through all essential steps to get the
DiGidot C4 up and running.
This wizard goes through following steps:
1. Device and network settings
2. Device positioning (in case of multiple devices)
3. Input/Output (IO) configuration
4. Security (Trigger security settings can be changed in the 'HTTP, UDP and OSC' sub menu on
the 'Triggers' page)
Open the user interface and go to the 'Getting started' wizard.
Follow the instructions carefully and complete the wizard in order to get your system up and running
quickly. In case you need more information about een certain subject, you can open the information
windows by clicking the 'ℹ︎ ' icons.
When the Getting started wizard has been completed correctly, your DiGidot C4 controller is ready to
use.

Scenes (DiGidot C4 Extended only)

Home > Scenes
A scene is a generated or recorded effect that can be played and triggered.
This page contains an overview of all scenes.
Click on the scenes to start or stop playing.
Select the pop over menu (3 dots) in the top right, to play, download edit or delete scenes. When
playing a scene the player bar will appear. The player bar will show the current selected scene.
Expanding the player bar by click the icon at the bottom right, makes it possible to set the speed,
hue and brightness of a scene.

Create scenes

There are two ways to create a scene in the DiGidot C4 interface.
Record scene
Home > Create scenes
The record button will become active when an incoming signal is detected.
To start recording, click the red record button on the underside of the page.
A timer starts running until the record/stop button is clicked again.
When the record is completed, you can play and stop the recorded scene. A trimming slider can be
used to adjust the beginning and end point of the record.
You can choose multiple options before saving the record, such as:
C4 Manual Version 2.1.5 32 74 -