Counter - DiGidot C4 Manual

latitude) or according to the built in city list. It is also possible to program an offset to these events
in order to start the trigger before or after the sun rises or sets.
Please consider following regarding Time keeping accuracy:
The internal clock (RTC) has a deviation of 0.0038%, which means effectively that the clock can get
behind up to ±20 minutes per year.
In order to resynchronize the RTC, the C4 (network) must be connected to a computer or to the
DiGidot C4 app and the interface must be loaded. The C4 will then automatically obtain the local real
time and will reset its RTC.
If this..
Enter location
There are two ways to enter the location of the project.
The first option is the online location finder. Enter the location, city and country for example
and press enter. The Interface will provide the latitude and longitude and current sunrise and
sunset time for this location. This option requires an internet connection.
The second option is the offline mode where the latitude and longitude can be entered
manually or where you can choose from a list of popular cities. This is recommended when no
internet access is available or when the google result is not accurate.
Choose one of the following options for this trigger:
Options
Sunrise
‣
Sunset
‣
It is possible to add or subtract time in minutes from the sunrise or sunset time by entering a
positive or negative amount of minutes.
NOTE: You can make combinations of multiple triggers to control specific actions.
In order to so, select 'ADD INPUT' in the 'If this..' menu. Note that only the combination of all selected
input triggers will trigger the action.
This feature is still in development and not yet fully supported for all combinations, please make sure
you're running the latest firmware and contact us for further information.

Counter

Home > Triggers > select '+' to add a trigger > Counter'
Counter triggers can be used to trigger events when the counter is higher than the entered delay in
milliseconds. The counter will start counting when the DiGidot startup and all triggers are loaded.
This takes about 5 seconds from powering the DiGidot C4. The counter can also be reseted by trigger
action.
If..
C4 Manual Version 2.1.5 43 74 -