Advertisement
Quick Links
Advertisement
Related Manuals for DiGidot C4
Summary of Contents for DiGidot C4
- Page 1 Quick Start-Up Guide...
-
Page 2: Table Of Contents
Table of contents Introduction Product Explanation Unboxing & Connecting to Computer Con guring Computer for Connection Con guring the DiGidot C4 Connection Possibilities Using with LED Software Technical Speci cations... -
Page 3: Introduction
Introduction The DiGidot C4 is part of the first generation of LED drivers that can directly control LED lights through Art-Net and DMX. It’s unique in its various capabilities. The DiGidot C4 has an enormous controlling capacity - more than 6,000 individual LEDs. -
Page 4: Product Explanation
Product explanation Extension Port Top Status Light Button Input/Ouput Port Analog Jack MircoSD Ethernet Ports Power Side Status Light... - Page 5 Art-Net software. The Ethernet Ports can also be used for daisy chaining several C4s. Power Port Used to power the DiGidot C4 (5V - 24V). * only avaialble on the DiGidot C4 Extended...
- Page 6 Product Explanation There are several states of the device. Different states are described using both the Top and the Side Status Light. Status Light Indicators Power On Fading Blue light between Top and Side Status Lights. (With License) Power On Top and Side Status Lights blink Yellow simultaneously.
-
Page 7: Unboxing & Connecting To Computer
Unboxing & Connecting to computer In every box there is one C4, one ethernet cable ( ) and one USB to power cable ( ). Firstly you have to connect the power cable (img. 1) to the power plug on the C4, the other end can be connected to any other USB output device (5V-24V). -
Page 8: Con Guring Computer For Connection
Ethernet settings will block your LAN network connection. If you wish to be connected to the Internet and using the DiGidot C4, then it is best to have a computer that has both LAN and Wi-fi connection. By accessing the User Interface of the DiGidot C4 you can change the settings, so it fits with... -
Page 9: Con Guring The Digidot C4
To configure the device you go to Settings. From there you can change the IP address and subnet mask of the DiGidot C4. The IP must always start with 10, for your computer to recognize it. The Subnet Mask should always stay 255.0.0.0. -
Page 10: Connection Possibilities
Depending on the LED type that is being used this how it should be connected to the Input/Output connector. These are only two examples of connecting LEDs to the DiGidot C4. The device can be connected to different types of LED outputs. It is compatible with: •... - Page 11 LED lights. Aside of the DiGidot C4 one should use a power supply. This is an example of how the DiGidot C4 is connected to a LED strip and a Power Supply. For other configurations you can contact us at the e-mail at the last page.
-
Page 12: Using With Led Software
Using with LED software & Various Consoles Once set up, the DiGidot C4 can be used with any type of Art-Net Software/Device. The DiGidot is recognized as an Art-Net device. Every DiGidot C4 can have an unique IP address, Subnet mask and name assigned to it for easier recognition. -
Page 13: Technical Speci Cations
• DMX TTL (4 Outputs) • Various LED IC Types: WS2812, WS2812B, TM1803, UCS8904, WS2811, APA102, WS2801, TM1809 (see the digidot.eu site for a complete list of IC types. A new IC type can be added on request) Light • LED Strips •... - Page 14 This product should not be disposed with other household waste. When you decide to dispose of this product and/or its battery, do so in accordance with local environmental regulations. 2015 InventDesign B.V. All rights reserved. DiGidot is a trademark of InventDesign.
- Page 15 Find more info at: www.digidot.eu info@digidot.eu +31 (0)20 82 00 170...
Need help?
Do you have a question about the C4 and is the answer not in the manual?
Questions and answers