Trigger Actions; Action Types; Play Scene; Play Playlist - DiGidot C4 Manual

The counter time is higher than the entered delay time.

Trigger actions

If the trigger condition(s) on the "if" side are positive, one or more actions can be executed.
When you've finished your trigger setup, click 'SAVE' to store your trigger settings.
Then..
This menu shows the available events that can be configured.
Select the devices that needs to perform an action.
‣
Select the action type and action parameters in the "Event settings" window.
‣

Action types

Select one of following actions from the drop down menu.

Play scene

Scene: Select the desired pre recorded scene from the drop down menu.
‣
Brightness: Set the brightness for this action.
‣

Play playlist

A playlist is a list of scenes with fade times and needs to be created in the main menu item called "
Playlists"
Playlist: Select the desired playlist from the drop down menu.
‣

Action list

The action list allows multiple actions and sub actions to be triggered in consecutive order, by the
same trigger input, every time this trigger state is positive.
Every step in this list is indicated by a #number and can be ordered with the drag and drop feature.
Every action may contain one or multiple sub actions that are triggered at the same time. An action
list always loops, this means it will start at the first step again if you trigger it at the last step of the
action list.
Action 1: Select an action from the drop down menu. An action will add one or more extra options
‣
depending on the action type. E.G. a Scene will add a drop down menu to select a scene and an
option to set a fade time.
ADD SUBACTION:
‣
C4 Manual Version 2.1.5 44 74 -